Vinyl Audio

Equipment => DIY => Topic started by: BSD2000 on August 31, 2013, 01:42:21 PM

Title: DIY Record Bin
Post by: BSD2000 on August 31, 2013, 01:42:21 PM
(http://www.vinylaudio.net/photos/Record_Bin.jpg)

I had a few questions about my record bin that's seen in my YouTube videos. I built it a few years ago, using the LP Bin (http://www.lpbin.com/lpbin/lpbinclassicoak#.UiIqMhuJpRU) design as a reference. It's  made from 3/4" Pine board; 44" high at the back, 28 1/2" wide, and 22" deep. It holds roughly 560 records and cost about $70 in materials. Here's a couple pictures I took while building it:
Title: Re: DIY Record Bin
Post by: lshin80 on September 07, 2013, 02:18:25 PM
Nice! You could also fit it with LED strips for better lighting. Is the wood raw or finished?.
Title: Re: DIY Record Bin
Post by: BSD2000 on September 08, 2013, 12:53:05 PM
It's raw. I bought some stain and polyurethane for it, but I never got around to finishing it. I should probably build another one since I still have another 600~700 records sitting in cardboard boxes and milk crates on the floor.   :-[

Users found this pages searching for: